(D) 1 Guidelines for the Surveys for the International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk and the Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk

 (DI) 1.1 Initial surveys – see part "General" section 4.1

(DI) 1.1.1 For compliance with the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk the examination of plans and designs of the structure, equipment, fittings, arrangements and materials should consist of:

(DI) 1.1.1.1 determining the products that it is intended that the ship will be permitted to carry and noting the corresponding minimum special requirements (IBC Code 12 ch.17) and any other special requirements (IBC Code 83/90/00/04 ch.15);

(DI) 1.1.1.2 examining the plans for the ship type, location of the cargo tanks, cargo containment, materials of construction, cargo temperature control, cargo tank vent systems, continuous monitoring of the concentration of flammable vapours, environmental control, electrical installations, fire protection and fire extinction, instrumentation and the provision, specification and stowage of the equipment for personnel protection (IBC Code 83/90/00 chs.2, 4, 6, 7, 8, 9, 10, 11, 13 and 14);

(DI) 1.1.1.3 examining the plans for the freeboard and stability, discharges below the bulkhead deck and survival capability (IBC Code 83/90/00/14 ch.2);

(DI) 1.1.1.4 examining the plans for the ship arrangements (IBC Code 83/90/00 ch.3);

(DI) 1.1.1.5 examining the plans for the cargo transfer (IBC Code 83/90/00 ch.5);

(DI) 1.1.1.6 examining the plans for the mechanical ventilation in the cargo area (IBC Code 83/90/00 ch.12);

(DI) 1.1.1.7 the provisions of (NI) 2.1.1 in Annex 3;

(DI) 1.1.1.8 examining, where applicable, the stability instrument (IBC Code 83/90/00/14 ch.2); and

(DI) 1.1.1.9 examining, when a dispensation from carriage of a stability instrument applies, the alternative means of verification for intact and damage stability (IBC Code 83/90/00/14 ch.2).

(DI) 1.1.2 For compliance with the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk, the survey during construction and after installation of the structure, equipment, fittings, arrangements and materials should consist of:

(DI) 1.1.2.1 confirming that tanks containing cargo or residues of cargo are suitably segregated from accommodation, service and machinery spaces and from drinking water and stores for human consumption, that cargo piping does not pass through any accommodation, service or machinery space other than cargo pump-rooms or pump-rooms and that cargoes are not to be carried in either the fore or the aft peak tank (IBC Code 83/90/00 ch.3);

(DI) 1.1.2.2 examining the air intakes and openings into the accommodation, service and machinery spaces in relation to the cargo piping and vent systems and their entrances, air inlets and openings in relation to the cargo area (IBC Code 83/90/00 ch.3);

(DI) 1.1.2.3 examining the arrangements of the cargo pump-rooms (IBC Code 83/90/00 ch.3);

(DI) 1.1.2.4 examining the accesses to spaces in the cargo area (IBC Code 83/90/00 ch.3);

(DI) 1.1.2.5 examining the bilge and ballast arrangements and confirming that pumps and pipelines are identified (IBC Code 83/90/00 ch.3);

(DI) 1.1.2.6 examining, when applicable, the bow or stern loading and unloading arrangements with particular reference to the air inlets and entrances to the accommodation, machinery and service spaces, the electrical equipment, fire-fighting arrangements and means of communication and testing the remote shut down for the cargo pumps (IBC Code 83/90/00 ch.3);

(DI) 1.1.2.7 confirming that the cargo tank types are arranged and installed in accordance with the approved plans, internally examining the cargo tanks, water ballast tanks and other spaces in the cargo area and pressure testing the boundaries (IBC Code 83/90/00 ch.4);

(DI) 1.1.2.8 examining the cargo transfer arrangements and confirming that any hoses are suitable for their intended purpose and, where appropriate, type-approved or marked with date of testing (IBC Code 83/90/00 ch.5);

(DI) 1.1.2.9 examining and testing any cargo heating and cooling systems (IBC Code 83/90/00 ch.7);

(DI) 1.1.2.10 confirming that the cargo tank vent systems have been installed in accordance with the approved plans (IBC Code 83/90/00 ch.8);

(DI) 1.1.2.11 confirming that high-level alarms, or overflow control systems or spill valves or other equivalent means provided to control possible liquid rising in the venting system, are operating satisfactorily (IBC Code 83/90/00 ch.8);

(DI) 1.1.2.12 confirming that suitable provision is made for drainage of vent lines and that no shut-off valves or other means of stoppage, including spectacle or blank flanges, are fitted either to the individual vents or to the header, if the vents are combined or either above or below pressure/vacuum relief valves with closed vent systems (IBC Code 83/90/00 ch.8);

(DI) 1.1.2.13 confirming that suitable provisions are made for primary and secondary means (or alternative measures) for controlled tank venting (IBC Code 83/90/00 ch.8);

(DI) 1.1.2.14 examining the location of the vent outlets in respect of the height above the weather deck or the fore and aft gangway, from the nearest air intakes or openings to accommodation, service and machinery spaces and ignition sources and confirming that any high velocity vents are of the approved type (IBC Code 83/90/00 ch.8);

(DI) 1.1.2.15 examining the cross-sectional area and height of the vent outlets for cargo tank purging with inert gas, as applicable (IBC Code 83/90/00/14 ch.8);

(DI) 1.1.2.16 examining the arrangements for environmental control, including the means of storing or generating and drying an inert gas (IBC Code 83/90/00 ch.9);

(DI) 1.1.2.17 examining the electrical installations and confirming that, when appropriate, special materials have been used and that the electrical equipment installed in hazardous locations, as permitted, is certified by a recognized authority for the cargoes to be carried (IBC Code 83/90/00 ch.10);

(DI) 1.1.2.18 confirming that independent cargo tanks are electrically bonded to the hull and that all gasketed cargo pipe joints and hose connections are electrically bonded (IBC Code 83/90/00 ch.10);

(DI) 1.1.2.19 examining the arrangements for the fire protection and fire extinction (IBC Code 83/90/00 ch.11);

(DI) 1.1.2.20 examining the fixed fire-fighting system for the cargo pump-room and confirming that the installation tests have been satisfactorily completed and that its means of operation are clearly marked (IBC Code 83/90/00 ch.11);

(DI) 1.1.2.21 checking the deck foam system for the cargo area, including the supplies of foam concentrate, and testing that the minimum number of jets of water at the required pressure in the fire main is obtained (see (EI) 1.1.3.1 in Annex 1), when the system is in operation (IBC Code 83/90/00 ch.11);

(DI) 1.1.2.22 examining the system for continuous monitoring of the concentration of flammable vapours and confirming that the installation tests have been satisfactorily completed (IBC Code 83/90/00 ch.11);

(DI) 1.1.2.23 confirming that suitable portable fire-extinguishing equipment for the cargoes to be carried is provided in the cargo area (IBC Code 83/90/00 ch.11);

(DI) 1.1.2.24 examining, and confirming the satisfactory operation of, the arrangements for the mechanical ventilation of spaces in the cargo area normally entered during cargo handling operations (IBC Code 83/90/00 ch.12) and checking in particular that:

(DI) 1.1.2.24.1 it may be controlled from outside the space;

(DI) 1.1.2.24.2 warning notices concerning its use have been posted;

(DI) 1.1.2.24.3 it is of the extraction type, with extraction from below the floor plates, unless the space houses electrical motors driving cargo pumps when it should be of the positive pressure type;

(DI) 1.1.2.24.4 the ducting does not pass through accommodation, machinery and service spaces and that the exhaust ducts are clear of the ventilation inlets and openings to such spaces;

(DI) 1.1.2.24.5 the electric motors driving ventilation fans are positioned outside the ventilation ducts and the ventilation fans and the ducts, in way of the fans only, are of non-sparking construction in hazardous locations;

(DI) 1.1.2.25 examining, and confirming the satisfactory operation of, the arrangements for the mechanical ventilation of spaces normally entered, other than those covered by (DI) 1.1.2.24 (IBC Code 83/90/00 ch.12);

(DI) 1.1.2.26 confirming that double bottoms, cofferdams, duct keels, pipe tunnels, hold spaces and other spaces where cargo may accumulate are capable of being efficiently ventilated to ensure a safe environment when entry into the space is necessary and that, when appropriate, permanent ducting is provided and any ventilation fans comply with (DI) 1.1.2.24.5 (IBC Code 83/90/00 ch.12);

(DI) 1.1.2.27 examining the intrinsically safe systems and circuits used for measurement, monitoring, control and communication purposes in all hazardous locations (IBC Code 83/90/00 ch.13);

(DI) 1.1.2.28 checking the provision of equipment for personnel protection (IBC Code 83/90/00 ch.14) and in particular that:

(DI) 1.1.2.28.1 suitable protective clothing is available for the crew engaged in loading and discharging operations and that suitable storage is provided;

(DI) 1.1.2.28.2 the required safety equipment and associated breathing apparatus and air supplies and, when appropriate, emergency-escape respiratory and eye protection, are provided and are properly stowed;

(DI) 1.1.2.28.3 medical first-aid equipment, including stretchers and oxygen resuscitation equipment are provided;

(DI) 1.1.2.28.4 arrangements have been made for the antidotes for the cargoes actually carried to be on board;

(DI) 1.1.2.28.5 decontamination arrangements and eyewashes are operational;

(DI) 1.1.2.28.6 the required gas detection instruments are on board and that arrangements have been made for the supply of the appropriate vapour detection tubes;

(DI) 1.1.2.28.7 the stowage for cargo samples is satisfactory;

(DI) 1.1.2.29 the provisions of (NI) 2.1.2 in annex 3; and

(DI) 1.1.2.30 confirming that sampling points or detector heads are located in suitable positions in order that potentially dangerous leakages are readily detected (IBC Code 07 ch.11.1.4, BCH Code ch.III, E 3.13).

(DI) 1.1.3 For compliance with the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk the check that all the required documentation has been placed on board the ship should consist of:

(DI) 1.1.3.1 confirming that a loading and stability information booklet, containing details of typical service and ballast conditions, provisions for evaluating other conditions of loading, a summary of the ship's survival capabilities and sufficient information to ensure that the ship is loaded and operated in a safe and seaworthy manner, is available on board (IBC Code 83/90/00/14 ch.2);

(DI) 1.1.3.2 confirming that damage survival capability information is supplied on the basis of loading information for all anticipated conditions of loading and variations in draught and trim (IBC Code 83/90/00 ch.2);

(DI) 1.1.3.3 confirming that a table giving the filling ratios for the cargo tanks at various densities has been provided (IBC Code 83/90/00 ch.16);

(DI) 1.1.3.4 confirming that a copy of the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk, or the equivalent national regulations, has been provided (IBC Code 83/90/00 ch.16);

(DI) 1.1.3.5 confirming that information relating to the chemical and physical properties of the products to be carried has been provided and that provision has been made for the measures to be taken in an accident (IBC Code 83/90/00 ch.16);

(DI) 1.1.3.6 confirming that a manual covering procedures for cargo transfer, tank cleaning, gas freeing, ballasting, etc. has been provided (IBC Code 83/90/00 ch.16);

(DI) 1.1.3.7 the provisions of (NI) 2.1.3 in annex 3;

(DI) 1.1.3.8 confirming that compatibility information as to material of construction, protective linings and coating is provided on board (IBC Code 83/04 ch.6);

(DI) 1.1.3.9 confirming, where applicable, the stability instrument has been approved and is operating satisfactorily (IBC Code 83/90/00/14 ch.2); and

(DI) 1.1.3.10 confirming, when a dispensation from carriage of a stability instrument applies, the alternative means of verification for intact and damage stability is recorded on the Certificate of Fitness and is being applied effectively (IBC Code 83/90/00/14 ch.2).

(DI) 1.1.4 For compliance with the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk the completion of the initial survey should consist of:

(DI) 1.1.4.1 after a satisfactory survey issuing the International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk.

(DA) 1.2 Annual surveys – see part "General" section 4.2

(DA) 1.2.1 For compliance with the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk and the Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk the examination of current certificates and other records should consist of:

(DA) 1.2.1.1 checking the validity, as appropriate, of the Cargo Ship Safety Equipment Certificate, the Cargo Ship Safety Radio Certificate and the Cargo Ship Safety Construction Certificate or the Cargo Ship Safety Certificate;

(DA) 1.2.1.2 checking the validity of the Safety Management Certificate (SMC) and that a copy of the Document of Compliance (DOC) is on board;

(DA) 1.2.1.3 checking the validity of the International Ship Security Certificate;

(DA) 1.2.1.4 checking the validity of the International Load Line Certificate or International Load Line Exemption Certificate;

(DA) 1.2.1.5 checking the validity of the International Oil Pollution Prevention Certificate;

(DA) 1.2.1.6 checking the certificates of class, if the ship is classed with a classification society;

(DA) 1.2.1.7 checking, when appropriate, the validity of the International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk or the Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk;

(DA) 1.2.1.8 checking, when appropriate, the validity of the International Sewage Pollution Prevention Certificate;

(DA) 1.2.1.9 checking, when appropriate, the validity of the International Air Pollution Prevention Certificate;

(DA) 1.2.1.10 confirming, when appropriate, the validity of the International Energy Efficiency Certificate (MARPOL Annex VI, regs.6.4 and 6.5);

(DA) 1.2.1.11 checking, when appropriate, the validity of the International Ballast Water Management Certificate;

(DA) 1.2.1.12 checking that the ship's complement complies with the Minimum Safe Manning Document (SOLAS 74/00/12 reg.V/14) (SOLAS 74/88 reg.V/13(b));

(DA) 1.2.1.13 checking that the master, officers and ratings are certificated as required by the STCW Convention;

(DA) 1.2.1.14 checking whether any new equipment has been fitted and, if so, confirming that it has been approved before installation and that any changes are reflected in the appropriate certificate;

(DA) 1.2.1.15 confirming that the loading and stability information booklet, containing details of typical service and ballast conditions, provisions for evaluating other conditions of loading, a summary of the ship's survival capabilities and sufficient information to ensure that the ship is loaded and operated in a safe and seaworthy manner, is available on board (IBC Code 83/90/00/14 ch.2) ( BCH Code 85/90/00/14 para.2.2.1);

(DA) 1.2.1.16 confirming that damage survival capability information is supplied on the basis of loading information for all anticipated conditions of loading and variations in draught and trim (IBC Code 83/90/00 ch.2) (No BCH Code 85/90/00 reference);

(DA) 1.2.1.17 confirming that a table giving the filling ratios for the cargo tanks at various densities has been provided (IBC Code 83/90/00 ch.16) (BCH Code 85/90/00 ch.III, part G);

(DA) 1.2.1.18 confirming that a copy of the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk or the Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk, or the equivalent national regulations, has been provided (IBC Code 83/90/00 ch.16) (BCH Code 85/90/00 ch.V);

(DA) 1.2.1.19 confirming that information relating to the chemical and physical properties of the products to be carried has been provided, and that provision has been made for the measures to be taken in an accident (IBC Code 83/90/00 ch.16) (BCH Code 85/90/00 ch.V);

(DA) 1.2.1.20 confirming that a manual covering procedures for cargo transfer, tank cleaning, gas freeing, ballasting, etc. has been provided (IBC Code 83/90/00 ch.16) (BCH Code 85/90/00 ch.V);

(DA) 1.2.1.21 confirming that the Procedures and Arrangements Manual is on board (IBC Code 83/90/00 ch.16A) (BCH Code 85/90/00 ch.VA);

(DA) 1.2.1.22 confirming that the shipboard marine pollution emergency plan is on board (MARPOL 04 Annex II, reg.17);

(DA) 1.2.1.23 confirming that the Cargo Record Book is on board and being correctly used (MARPOL 04 Annex II, reg.15);

(DA) 1.2.1.24 confirming that compatibility information as to material of construction, protective linings and coating is provided onboard (IBC Code 83/04 ch.6) (BCH Code 85/90/00 ch.II, part G);

(DA) 1.2.1.25 confirming the availability of the International Anti-fouling System Certificate (AFS 2001 annex 4 reg.2), when applicable.

(DA) 1.2.1.26 confirming, where applicable, the approved stability instrument is available on board and operating satisfactorily (IBC Code 83/90/00/14 ch.2); and

(DA) 1.2.1.27 confirming, when a dispensation from carriage of a stability instrument applies, the alternative means of verification for intact and damage stability recorded on the Certificate of Fitness is available on board and being applied effectively (IBC Code 83/90/00/14 ch.2).

(DA) 1.2.2 For compliance with the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk and the Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk the annual survey of the structure, equipment, fittings, arrangements and materials should consist of:

(DA) 1.2.2.1 confirming that wheelhouse doors and windows, sidescuttles and windows in superstructure and deckhouse ends facing the cargo area are in a satisfactory condition (IBC Code 83/90/00 ch.3) (BCH Code 85/90/00 ch.IIC);

(DA) 1.2.2.2 confirming that potential sources of ignition in or near the cargo pump-room are eliminated, such as loose gear, combustible materials, etc., that there are no signs of undue leakage and that access ladders are in a satisfactory condition (IBC Code 83/90/00 ch.3) (BCH Code 85/90/00 ch.IIC);

(DA) 1.2.2.3 confirming that removable pipe lengths or other approved equipment necessary for cargo separation are available in the pump-room and are in a satisfactory condition (IBC Code 83/90/00 ch.3) (BCH Code 85/90/00 ch.IIC);

(DA) 1.2.2.4 examining all pump-room bulkheads for signs of cargo leakage or fractures and, in particular, the sealing arrangements of all penetrations of pump-room bulkheads (IBC Code 83/90/00 ch.3) (BCH Code 85/90/00 ch.IIC);

(DA) 1.2.2.5 confirming that the remote operation of the cargo pump bilge system is satisfactory (IBC Code 83/90/00 ch.3) (BCH Code 85/90 ch.IIC);

(DA) 1.2.2.6 examining the bilge and ballast arrangements and confirming that pumps and pipelines are identified (IBC Code 83/90/00 ch.3) (No BCH Code 85/90/00 reference);

(DA) 1.2.2.7 confirming, when applicable, that the bow or stern loading and unloading arrangements are in order and testing the means of communication and the remote shut down for the cargo pumps (IBC Code 83/90/00 ch.3) (No BCH Code 85/90/00 reference);

(DA) 1.2.2.8 examining the cargo transfer arrangements and confirming that any hoses are suitable for their intended purpose and, where appropriate, type-approved or marked with date of testing (IBC Code 83/90/00 ch.5) (BCH Code 85/90/00 ch.IID);

(DA) 1.2.2.9 examining, when applicable, the cargo heating or cooling systems, including any sampling arrangements, and confirming that the means for measuring the temperature and associated alarms are operating satisfactorily (IBC Code 83/90/00 ch.7) (BCH Code 85/90/00 ch.IIF);

(DA) 1.2.2.10 examining, as far as practicable, the cargo tank vent system, including the pressure/vacuum valves and secondary means to prevent over- or under-pressure and devices to prevent the passage of flame, and the arrangements of cargo tank purging with inert gas, as applicable (IBC Code 83/90/99/00/14 ch.8,) (BCH Code 85/90/99/00 ch.IIE);

(DA) 1.2.2.11 examining the gauging devices, high-level alarms and valves associated with overflow control (IBC Code 83/90/00 ch.8) (BCH Code 85/90/00 ch.IIE);

(DA) 1.2.2.12 confirming that arrangements for sufficient gas to be carried or generated to compensate for normal losses, and that the means provided for monitoring ullage spaces, are satisfactory (IBC Code 83/90/00 ch.9) (BCH Code 85/90/00 ch.IIH);

(DA) 1.2.2.13 confirming that arrangements are made for sufficient medium to be carried where drying agents are used on air inlets to cargo tanks (IBC Code 83/90/00 ch.9) (BCH Code 85/90/00 ch.IIH);

(DA) 1.2.2.14 confirming that all electrical equipment in dangerous zones is suitable for such locations, is in satisfactory condition and has been properly maintained (IBC Code 83/90/00 ch.10) (BCH Code 85/90/00 ch.IIIB);

(DA) 1.2.2.15 examining the fixed fire-fighting system for the cargo pump-room and the deck foam system for the cargo area and confirming that their means of operation are clearly marked (IBC Code 83/90/00 ch.11) (BCH Code 85/90/00 ch.IIIE);

(DA) 1.2.2.16 confirming that the condition of the portable fire-extinguishing equipment for the cargoes to be carried in the cargo area is satisfactory (IBC Code 83/90/00 ch.11) (BCH Code 85/90/00 ch.IIIE);

(DA) 1.2.2.17 confirming that the system for continuous monitoring of the concentration of flammable vapours is satisfactory (IBC Code 83/90/00 ch.11);

(DA) 1.2.2.18 examining, as far as practicable, and confirming the satisfactory operation of, the arrangements for the ventilation of spaces normally entered during cargo handling operations and other spaces in the cargo area (IBC Code 83/90/00 ch.12) (BCH Code 85/90/00 ch.IIIA);

(DA) 1.2.2.19 confirming, as far as practicable, that the intrinsically safe systems and circuits used for measurement, monitoring, control and communication purposes in all hazardous locations are being properly maintained (IBC Code 83/90/00 ch.13) (BCH Code 85/90/00 ch.IIIC);

(DA) 1.2.2.20 examining the equipment for personnel protection (IBC Code 83/90/00 ch.14) (BCH Code 85/90/00 ch.IIIF) and in particular that:

(DA) 1.2.2.20.1 the protective clothing for crew engaged in loading and discharging operations and its stowage is in a satisfactory condition;

(DA) 1.2.2.20.2 the required safety equipment and associated breathing apparatus and associated air supplies and, when appropriate, emergency-escape respiratory and eye protection, are in a satisfactory condition and are properly stowed;

(DA) 1.2.2.20.3 medical first-aid equipment, including stretchers and oxygen resuscitation equipment are in a satisfactory condition;

(DA) 1.2.2.20.4 arrangements have been made for the antidotes for the cargoes actually carried to be on board;

(DA) 1.2.2.20.5 decontamination arrangements and eyewashes are operational;

(DA) 1.2.2.20.6 the required gas detection instruments are on board and arrangements have been made for the supply of the appropriate vapour detection tubes;

(DA) 1.2.2.20.7 the arrangements for the stowage of cargo samples are satisfactory;

(DA) 1.2.2.21 the provisions of (NA) 2.2.2 in annex 3; and

(DA) 1.2.2.22 confirming that sampling points or detector heads are located in suitable positions in order that potentially dangerous leakages are readily detected (IBC Code 07 ch.11.1.4) ( BCH Code ch.IIIE 3.13).

(DA) 1.2.3 For compliance with the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk and the Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk the completion of the annual survey should consist of:

(DA) 1.2.3.1 after a satisfactory survey, endorsing the International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk or the Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk; and

(DA) 1.2.3.2 if a survey shows that the condition of a ship or its equipment is unsatisfactory – see part "General" section 4.8.

(DIn) 1.3 Intermediate surveys – see part "General", section 4.3

(DIn) 1.3.1 For compliance with the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk and the Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk the examination of current certificates and other records should consist of:

(DIn) 1.3.1.1 the provisions of (DA) 1.2.1.

(DIn) 1.3.2 For compliance with the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk and the Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk the intermediate survey of the structure, equipment, fittings, arrangements and materials should consist of:

(DIn) 1.3.2.1 the provisions of (DA) 1.2.2;

(DIn) 1.3.2.2 examination of vent line drainage arrangements (IBC Code 83/90/00 ch.8) (BCH Code 85/90/00 ch.IIE);

(DIn) 1.3.2.3 confirmation, where applicable, that pipelines and independent cargo tanks are electrically bonded to the hull (IBC Code 83/90/00 ch.10) (BCH Code 85/90/00 ch.IIIB);

(DIn) 1.3.2.4 generally examining the electrical equipment and cables in dangerous zones such as cargo pump-rooms and areas adjacent to cargo tanks to check for defective equipment, fixtures and wiring; the insulation resistance of the circuits should be tested and in cases where a proper record of testing is maintained, consideration should be given to accepting recent readings (IBC Code 83/90/00 ch.10) (BCH Code 85/90/00 ch.IIIB);

(DIn) 1.3.2.5 confirmation that spares are provided for cargo area mechanical ventilation fans (IBC Code 83/90/00 ch.12) (BCH Code 85/90/00 ch.IIIA); and

(DIn) 1.3.2.6 the provisions of (NIn) 2.3.2 in annex 3.

(DIn) 1.3.3 For compliance with the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk and the Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk the completion of the intermediate survey should consist of:

(DIn) 1.3.3.1 after a satisfactory survey endorsing the International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk or the Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk; and

(DIn) 1.3.3.2 if a survey shows that the condition of a ship or its equipment is unsatisfactory – see part "General", section 4.8.

(DR) 1.4 Renewal surveys – see part "General" section 4.4

(DR) 1.4.1 For compliance with the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk and the Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk the examination of current certificates and other records should consist of:

(DR) 1.4.1.1 the provisions of (DA) 1.2.1, except the International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk or the Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk.

(DR) 1.4.2 For compliance with the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk and the Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk the renewal survey of the structure, equipment, fittings, arrangements and materials should consist of:

(DR) 1.4.2.1 the provisions of (DIn) 1.3.3; and

(DR) 1.4.2.2 the provisions of (NR) 2.4.2 in annex 3.

(DR) 1.4.3 For compliance with the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk and the Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk the completion of the renewal survey should consist of:

(DR) 1.4.3.1 after a satisfactory survey, issuing the International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk or the Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk.