4.3 Permissible Limits
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC/Circular.836 – Recommendation on Loading Instruments – (Adopted on 6 February 1998) - Annex 2 - No.48 (1997) - Recommendation on Loading Instruments - 4 Functional Specification - 4.3 Permissible Limits

4.3 Permissible Limits

  4.3.1 The user should be able to view the following Society imposed structural limitations in a clear and unambiguous manner:

  • 1. All permissible still water shear forces and still water bending moments.

  • 2. Where applicable, the permissible still water torsion moments.

  • 3. Where applicable, all local loading limits for both one hold and adjacent hold loading.

  • 4. Cargo hold weight.

  • 5. Ballast tank/hold capacities.

  • 6. Filling restrictions.

  4.3.2 It should be readily apparent to the user when any of the imposed structural limits have been exceeded.

Parent topic: 4 Functional Specification
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.