6.10 Data display
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.108(49) - Revised Guidelines and Specifications for Oil Discharge Monitoring and Control Systems for Oil Tankers - (Adopted on 18 July 2003)Amended by Resolution MEPC.240(65) - Annex - Revised Guidelines and Specifications for Oil Discharge Monitoring and Control Systems for Oil Tankers - 6 Technical Specifications - 6.10 Data display

6.10 Data display

  6.10.1 In addition to the recorded printout, the current data should be visibly displayed and should as a minimum contain the following:

  • .1 instantaneous rate of discharge of oil (litres per nautical mile);

  • .2 total quantity of oil discharged (cubic metres or litres);

  • .3 instantaneous oil content (ppm)

  • .4 flow rate;

  • .5 ship's speed; and

  • .6 status of the overboard discharge control or arrangement.

  6.10.2 The data display should be located in a position easily observed by the person in charge of the overboard discharge operation.

Parent topic: 6 Technical Specifications
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.