2.3.1 Installation tests should be performed soon
after the loading instrument has been installed onboard the ship.
2.3.2 During the installation test one of the
ship's senior officers should operate the loading instrument and calculate
the test conditions. This operation should be witnessed by a Society
surveyor. The results obtained from the loading instrument should
be identical to the results stated in the endorsed test conditions.
Should the numerical output from the loading instrument be at variance
with the endorsed test conditions, no certification should be issued.
2.3.3 An installation test should also be carried
out on the second nominated computer, which would be used in the event
of failure of the first computer. The results obtained from the loading
instrument should be identical to the results stated in the endorsed
test conditions. Should the numerical output from the loading instrument
be at variance with the endorsed test conditions, no certificate should
be issued. Where the installation test is carried out on a Type Approved
computer, a second nominated computer and test are not required.
2.3.4 Where the hardware is not Type Approved,
it should be demonstrated that the Program Installation Test is acceptable
on both the first and second nominated computers prior to the issue
of a Program Installation Test Certificate.
2.3.5 After completion of satisfactory installation
tests, the Society surveyor should attach the endorsed test conditions
to the previously reviewed operations manual. The Society should then
issue the Program Installation Test Certificate.