5 Low flame-spread surfaces
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - FTP Code - International Code for Application of Fire Test Procedures – Resolution MSC.61(67) - Annex - International Code for Application of Fire Test Procedures - Annex 2 - Products Which may be Installed Without Testing and/or Approval - 5 Low flame-spread surfaces

5 Low flame-spread surfaces

  5.1 Non-combustible materials are considered to comply with the requirements of part 5 of annex 1. However, due consideration shall be given to the method of application and fixing (e.g. glue).

  5.2 Primary deck coverings classified as not readily ignitable in accordance with part 6 of annex 1 are considered to comply with the requirements of part 5 of annex 1 for floor coverings.

  5.3 For high-speed craft, surfaces and materials that are qualified as fire-restricting materials are considered to comply with the requirements of part 5 of annex 1 without further testing.

Parent topic: Annex 2 - Products Which may be Installed Without Testing and/or Approval
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.