2.9 Tilt and Vibration
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.2(VI) - Recommendation on International Effluent Standards and Guidelines for Performance Tests for Sewage Treatment Plants... - Annex B - Guidelines for Performance Tests for Sewage Treatment Plants With Respect to Effluent Standards - II Testing Considerations - 2.9 Tilt and Vibration

2.9 Tilt and Vibration

 Administrations should be satisfied that the equipment can operate under conditions of tilt consistent with internationally acceptable shipboard practice. It may be necessary to subject control and sensor components to shock and vibration testing to verify their suitability for marine use.

Parent topic: II Testing Considerations
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.