Statutory Documents - IMO Publications and Documents - Resolutions - Assembly - IMO Resolution A.1071(28) – Revised Guidelines on the Implementation of the International Safety Management (ISM) Code by Administrations – (Adopted on 4 December 2013) - Revised Guidelines on the Implementation of the ISM Code by Administrations - 2 SCOPE AND APPLICATION
2 SCOPE AND APPLICATION
2.1 Definitions
The terms used in these Revised Guidelines have the same meaning as those given in the ISM Code.
2.2 Scope and application
These Revised Guidelines establish basic principles for:
-
.1 verifying that the safety management system of a Company responsible for the operation of ships, or the safety management system for the ship or ships controlled by the Company, complies with the ISM Code;
-
.2 carrying out the interim, initial, annual and renewal verification of the Document of Compliance and the interim, initial, intermediate and renewal verification(s) of the Safety Management Certificate and the issuing/endorsement of corresponding documents; and
-
.3 the scope of the additional verification.
| Copyright 2016 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. |  |