Wind loadings
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - 1979 MODU Code – Code for the Construction and Equipment of Mobile Offshore Drilling Units – Resolution A.414(XI) - Chapter 2 – Construction, Strength and Materials - 2.2 Design loads - Wind loadings

Wind loadings

  2.2.2 Sustained and gust wind velocities, as relevant, should be considered when determining wind loadings. Pressures and resultant forces should be calculated by the method referred to in 3.2 or by some other method to the satisfaction of the Administration.

Parent topic: 2.2 Design loads
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.