Appendix 4 – Index
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Maritime Safety Committee - Resolution MSC.354(92) – Amendments to the International Maritime Solid Bulk Cargoes (IMSBC) Code – (Adopted on 21 June 2013) - Consolidated into IMSBC Code - Appendix 4 – Index

Appendix 4 – Index

  50 Include in ALUMINA HYDRATE a synonym as:

  • Aluminium hydroxide

  51 Insert an additional name under SAND as:

  • Material Group References
    Spodumene C see SAND

  52 In the line for SILICOMANGANESE in the line for Material, amend the Bulk Shipping Name to read "SILICOMANGANESE (low carbon)".

  53 Include the following names in the alphabetical index:

Material Group References
ALUMINA HYDRATE A and B  
ALUMINIUM SMELTING /
REMELTING BY-PRODUCTS,
PROCESSED
A and B  
CLINKER ASH, WET A and B  
COAL TAR PITCH B  
COARSE IRON AND STEEL SLAG AND ITS MIXTURE C  
CRUSHED CARBON ANODES C  
GRAIN SCREENING PELLETS C  
GRANULATED NICKEL MATTE (LESS THAN 2% MOISTURE CONTENT) B  
GYPSUM GRANULATED C  
ILMENITE (ROCK) C  
ILMENITE (UPGRADED) A  
NICKEL ORE A  
SAND, HEAVY MINERAL A  
SILICON SLAG C  
SOLIDIFIED FUELS RECYCLED FROM PAPER AND PLASTICS B  
WOOD TORREFIED B  

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.