Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.197(62) – 2011 Guidelines for the Development of the Inventory of Hazardous Materials – (Adopted on 15 July 2011) - Annex – 2011 Guidelines for the Development of the Inventory of Hazardous Materials - 7 Supplier's Declaration of Conformity - 7.2 Contents and format
7.2 Contents and format
The Supplier's Declaration of Conformity should contain the following:
-
.1 unique identification number;
-
.2 name and contact address of the issuer;
-
.3 identification of the subject of the Declaration of Conformity (e.g., name, type, model number, and/or other relevant supplementary information);
-
.4 statement of conformity;
-
.5 date and place of issue; and
-
.6 signature (or equivalent sign of validation), name and function of the authorized person(s) acting on behalf of the issuer.
An example of the Supplier's Declaration of Conformity is shown in appendix 7.
| Copyright 2016 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. |  |