Appendix 2 - Form of the Offshore Supply Vessel Document of Compliance
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Maritime Safety Committee - Resolution MSC.235(82) - Adoption of the Guidelines for the Design and Construction of Offshore Supply Vessels, 2006 - (adopted on 1 December 2006)Amended by Resolution MSC.335(90) - Annex - Guidelines for the Design and Construction of Offshore Supply Vessels, 2006 - Appendix 2 - Form of the Offshore Supply Vessel Document of Compliance

Appendix 2 - Form of the Offshore Supply Vessel Document of Compliance

DOCUMENT OF COMPLIANCE
(Official seal)
Issued under the provisions of the
GUIDELINES FOR THE DESIGN AND CONSTRUCTION OF OFFSHORE SUPPLY VESSELS, 2006 (resolution MSC.235(82))
under the authority of the Government of
..........................................................................................................................
(full official designation of country)
by ..........................................................................................................................
(full official designation of the competent person
or organization recognized by the Administration)
Particulars of the vessel footnote
Name of vessel .................................................................................
Distinctive number or letters .................................................................................
Port of registry .................................................................................
Gross tonnage .................................................................................
Deadweight .................................................................................
IMO Numberfootnote .................................................................................
Date on which keel was laid or
on which the vessel was at
a similar stage of construction 		.................................................................................
           
The vessel is exempted from compliance with the following provisions of the Guidelines:
..............................................................................................................................................
           
THIS IS TO CERTIFY that the design and construction of the vessel complies with relevant provision of the Guidelines.
Issued at ............................................................................................................... (place of issue of Certificate)
           
The undersigned declares that he is duly authorized by the said Government to issue this Certificate.
.....................................................   ....................................................................
(Date of issue)   (signature of authorized official issuing the certificate)
           
(Seal or stamp of the authority, as appropriate)
Parent topic: Annex - Guidelines for the Design and Construction of Offshore Supply Vessels, 2006
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.