4.3.2 Construction of rigid liferafts
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - LSA Code - International Life-Saving Appliance Code – Resolution MSC.48(66) - Chapter IV - Survival Craft - 4.3 Rigid liferafts - 4.3.2 Construction of rigid liferafts

4.3.2 Construction of rigid liferafts

  4.3.2.1 The buoyancy of the liferaft shall be provided by approved inherently buoyant material placed as near as possible to the periphery of the liferaft. The buoyant material shall be fire-retardant or be protected by a fire-retardant covering.

  4.3.2.2 The floor of the liferaft shall prevent the ingress of water and shall effectively support the occupants out of the water and insulate them from cold.

Parent topic: 4.3 Rigid liferafts
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.