4.6 Design loads and supporting structures
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1363 – Interim Guidelines for the Construction and Equipment of Ships Carrying Natural Gas Hydrate Pellets (NGHP) in Bulk – (30 June 2010) - Annex – Interim Guidelines for the Construction and Equipment of Ships Carrying Natural Gas Hydrate Pellets (NGHP) in Bulk - 4 General Requirements - 4.6 Design loads and supporting structures

4.6 Design loads and supporting structures

  4.6.1 Design loads should be determined based on the methods accepted by the Administration, taking into account the representative loading conditions and reasonably worst ship motion. The provisions in paragraph 4.3 of the IGC Code need not apply to NGHP carriers.

  4.6.2 Supporting structures for cargo containment systems should be designed based on the methods accepted by the Administration, taking into account the various loads acting on the structures. The provisions in paragraph 4.6 of the IGC Code need not apply to NGHP carriers.

Parent topic: 4 General Requirements
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.