Circular
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1383 – Unified Interpretation of the International Code of Safety for High-Speed Craft, 1994 (1994 HSC Code) – (3 December 2010) - Circular

Circular

  1 The Maritime Safety Committee, at its eighty-eighth session (24 November to 3 December 2010), with a view to providing more specific guidance for certain Rules which are open to different interpretations contained in IMO instruments, approved the unified interpretations of the International Code of Safety for High-Speed Craft, 1994 (1994 HSC Code) prepared by the Sub-Committee on Radiocommunications and Search and Rescue, at its fourteenth session, as set out in the annex.

  2 Member Governments are invited to use the annexed unified interpretations as guidance when applying relevant provisions of the 1994 HSC Code and to bring the unified interpretations to the attention of all parties concerned.

Parent topic: MSC.1/Circular.1383 – Unified Interpretation of the International Code of Safety for High-Speed Craft, 1994 (1994 HSC Code) – (3 December 2010)
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.