Section 1 General
Clasification Society 2024 - Version 9.40
Clasifications Register Guidance Information - Guidance for Approval, Manufacture, Testing and Certification of High Manganese Austenitic Steel for Low Temperature Service, July 2022 - Chapter 2 Manufacture, Testing and Certification - Section 1 General

Section 1 General

Parent topic: Chapter 2 Manufacture, Testing and Certification

1.1 Scope

1.1.1 This Chapter provides the specific guidance for high manganese austenitic steels for low temperature service which are to be manufactured, tested and certified in accordance with Ch 1 General Requirements and Ch 2 Testing Procedures for Metallic Materials of the Rules for the Manufacture, Testing and Certification of Materials, July 2022.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.