3.4 Checking of surface preparation
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Assembly - IMO Resolution A.798(19) – Guidelines for the Selection, Application and Maintenance of Corrosion Prevention Systems of Dedicated Seawater Ballast Tanks – (Adopted on 23 November 1995) - Annex - Guidelines for the Selection, Application and Maintenance of Corrosion Prevention Systems of Dedicated Seawater Ballast Tanks - 3 Coating - 3.4 Checking of surface preparation

3.4 Checking of surface preparation

  3.4.1 Checks on the steel surface cleanliness and roughness profile should be carried out at the end of the surface preparation and before the application of the primer coat, in accordance with the manufacturer's specifications.

Parent topic: 3 Coating
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.