15 Connections with Other Equipment footnote
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Maritime Safety Committee - Resolution MSC.232(82) - Adoption of the Revised Performance Standards for Electronic Chart Display and Information Systems (ECDIS) - (Adopted on 5 December 2006) - Annex - Revised Performance Standards for Electronic Chart Display and Information Systems (ECDIS) - Module C - Interfacing and Integration - 15 Connections with Other Equipment1

15 Connections with Other Equipment footnote

  15.1 ECDIS should not degrade the performance of any equipment providing sensor inputs. Nor should the connection of optional equipment degrade the performance of ECDIS below this standard.

  15.2 ECDIS should be connected to the ship’s position fixing system, to the gyro compass and to the speed and distance measuring device. For ships not fitted with a gyro compass, ECDIS should be connected to a marine transmitting heading device.

  15.3 ECDIS may provide a means to supply SENC information to external equipment.

Parent topic: Module C - Interfacing and Integration
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.