Periodic servicing of hydrostatic release units
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - 1989 MODU Code – Code for the Construction and Equipment of Mobile Offshore Drilling Units, 1989 – Resolution A.649(16) - Chapter 10 – Life Saving Appliances and Equipment - 10.18 Operational readiness, maintenance and inspections - Periodic servicing of hydrostatic release units

Periodic servicing of hydrostatic release units

  10.18.10 Hydrostatic release units should be serviced:

  • .1 at intervals not exceeding 12 months. However, in cases where it appears proper and reasonable, the Administration may extend this period to 17 months;

  • .2 at a servicing station which is competent to service them, maintains proper servicing facilities and uses only properly trained personnel.

Parent topic: 10.18 Operational readiness, maintenance and inspections
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.