of the Agreement Governing the Delegation of Statutory Certification and Services
for Ships Registered in [State] Between [Administration] and [Recognized
Organization] Dated [Date] with Effect from [Date] Covering The: Applicable
Instruments and Degree of Authorization
1 The RO is hereby authorized as listed below to carry out statutory certification
and services and require repairs on behalf of the Administration in accordance with
the applicable instruments.
The Administration shall specify the scope of authorization granted to an RO,
considering the following:
-
.1 ship types and sizes;
-
.2 conventions and other instruments, including relevant national
legislation;
-
.3 approval of drawings;
-
.4 approval of materials and equipment;
-
.5 surveys, audits, inspections;
-
.6 issuance, endorsement and/or renewal of certificates;
-
.7 corrective actions;
-
.8 withdrawal or cancellation of certificates; and
-
.9 reporting requirements.
The following three types of authorizations apply as noted:
-
F: Full Authorization to perform plan review, carry out surveys, inspections
and audits, and issue and/or revoke necessary interim and full-term
certificates.
-
P: Partial Authorization to perform plan review, carry out surveys,
inspections and audits, and possibly issue interim certificates (specific
guidance to be provided by the Administration and full-term certificate is
to be issued by the Administration).
-
L: Limited Authorization to account for other special categories not covered
by the above, such as case-by-case authorization or geographical
limitations.
2 The listing of instruments and type of authorization is as follows:
To be followed by a listing of the applicable instruments with specific
identification of the desired authorization (F/P/L) as applicable.