4.2 Approval and Certification Procedures
Clasification Society 2026 - Version 9.60
Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.205(62) – 2011 Guidelines and Specifications for Add-On Equipment for Upgrading Resolution MEPC.60(33)–Compliant Oil Filtering Equipment – (Adopted on 15 July 2011) - Annex – 2011 Guidelines and Specifications for Add-on Equipment for Upgrading Resolution MEPC.60(33)-Compliant Oil Filtering Equipment - 4 Specification for Type Approval Testing of Add-On Equipment - 4.2 Approval and Certification Procedures

4.2 Approval and Certification Procedures

 Add-on equipment which in every respect fulfils the provisions of these Guidelines may be approved by the Administration for fitting on board ships. The approval should take the form of a certificate of type approval specifying the main particulars of the apparatus and any limiting conditions on its usage necessary to ensure its proper performance. Such certificate should be issued in the format shown in part 3 of the annex.

Parent topic: 4 Specification for Type Approval Testing of Add-On Equipment
Copyright 2026 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.