12.1.1 General
Clasification Society 2024 - Version 9.40
Statutory Documents - MCA Publications - MGN 280 - Small Vessels in Commercial Use for Sport or Pleasure, Workboats and Pilot Boats - Alternative Construction Standards - 12 Freeboard and Freeboard Marking - 12.1 Sailing Vessels - 12.1.1 General

12.1.1 General

 A sailing vessel required to be provided with an approved Stability Information Booklet, other than a vessel assessed in conjunction with Section 11.8.4, should have a freeboard mark placed on each side of the hull at the longitudinal position of the longitudinal centre of flotation for the maximum draught at which the stability of the vessel has been determined. In no case should this draught be greater than the draught corresponding to the maximum displacement for which the scantlings have been approved.

Parent topic: 12.1 Sailing Vessels
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.