Section 14 Seawater density

Clasification Society 2024 - Version 9.40

Clasifications Register Rules and Regulations - Submarine Assurance Framework, July 2022 - Volume 1 Submarine Assurance - Part 4 Whole Boat Requirements - Chapter 2 Transverse Criteria - Section 14 Seawater density

Section 14 Seawater density

14.1 Functional objective

14.1.1 The submarine, systems, equipment and components shall be able to operate when exposed to the range of water density which can be experienced by the submarine in all foreseeable operating conditions.

14.2 Performance requirements

14.2.1 The maximum and minimum static and transient water density shall be defined for normal and abnormal operating conditions. Density limits are to be set taking into account the range of seawater salinity and areas of operation.

14.2.2 The systems, equipment and components are to be verified as being effective and safe for the full range of water density.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.