Purpose
(1) The purpose of this paragraph is to reduce the hazard to life from smoke and
toxic products generated during a fire in spaces where persons normally work
or live by limiting the quantity of smoke and toxic products released from
combustible materials, including surface finishes, during a fire.
Paints, Varnishes and other Finishes
(2) Paints, varnishes and other finishes used on exposed interior surfaces shall
not be capable of producing excessive quantities of smoke and toxic
products, this being determined in accordance with the Fire Test Procedures
Code.
(3) Paints, varnishes and other finishes used on exposed surfaces of cabin
balconies, excluding natural hard wood decking systems, shall not be capable
of producing excessive quantities of smoke and toxic products, this being
determined in accordance with the Fire Test Procedures Code.
Primary Deck Coverings
(4) Notwithstanding 6.2(34), primary deck coverings, if applied within
accommodation and service spaces, control stations and on open decks
shall be of approved material which will not give rise to smoke or
toxic or explosive hazards at elevated temperatures, this being
determined in accordance with the Fire Test Procedures Code.
(5) Notwithstanding 6.2(34) primary deck coverings on cabin balconies shall not
give rise to smoke, toxic or explosive hazards at elevated temperatures,
this being determined in accordance with the Fire Test Procedures Code.