Guideline
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC/Circular.488 – Containers and Cargoes – (Adopted on 6 June 1988) - Carriage of GrainGuidance on interpretations and equivalences - 16 Length measured to a corrugated bulkhead - Guideline

Guideline

 When measuring length to a corrugated bulkhead, the length should be deemed to be the distance to the midpoint between the outer and the inner transverse, plane surfaces as shown in figure 4.

Figure 4 Length to a corrugated bulkhead

Parent topic: 16 Length measured to a corrugated bulkhead
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.