Guideline
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC/Circular.488 – Containers and Cargoes – (Adopted on 6 June 1988) - Carriage of GrainGuidance on interpretations and equivalences - 14 Boundary distance - Guideline

Guideline

 When calculating the average void depth (Vd) in accordance with part B, section I(A), the boundary distance in the corner of a compartment should be the distance from the hatch end beam or from the hatch side girder to the boundary of the compartment, whichever is the greater. The girder depth (d) should be taken to be the depth of the hatch end beam or the depth of the hatch side girder, whichever is the least.

Parent topic: 14 Boundary distance
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.