4.2.7 Design temperature
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - 1983 IGC Code - International Code for the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk - Chapter 4 Cargo Containment - 4.2 Definitions - 4.2.7 Design temperature

4.2.7 Design temperature

 The design temperature for selection of materials is the minimum temperature at which cargo may be loaded or transported in the cargo tanks. Provision to the satisfaction of the Administration should be made to ensure that the tank or cargo temperature cannot be lowered below the design temperature.

Parent topic: 4.2 Definitions
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.