2 Loading Marks
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - SCV Code - Code of Safety for Small Commercial Vessels Operating in the Caribbean - Chapter III - Freeboard, Stability and Watertight Integrity - Part A - Freeboard - 2 Loading Marks

2 Loading Marks

 A vessel shall have permanent loading marks placed on each side of the vessel forward, amidships and aft to indicate the maximum allowable draft and trim corresponding to the minimum freeboard determined according to regulation III/1. Such a loading mark shall be a horizontal line of at least 200mm (8 inches) in length forward and aft and 300mm (12 inches) amidships and 25mm (1 inch) in height, with its upper edge passing through the point of maximum draft. The loading mark shall be painted in a contrasting colour to the sideshell paint.

Parent topic: Part A - Freeboard
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.