4.3 In-service condition monitoring
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1399 – Guildelines on Procedures for In-Service Maintenance and Repair of Coating Systems for Cargo Oil Tanks of Crude Oil Tankers – (10 June 2011) - Annex – Guidelines for Maintenance and Repair of Protective Coatings for Cargo Oil Tanks of Crude Oil Tankers - 4 Coating Assessment Methods - 4.3 In-service condition monitoring

4.3 In-service condition monitoring

 In cases where tank entry is made and coating condition monitoring is carried out and a report provided, it should be in a format as set out in the appendix.

Parent topic: 4 Coating Assessment Methods
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.