5.1 Sensors
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Maritime Safety Committee - Resolution MSC.64(67) - Adoption of New and Amended Performance Standards - (Adopted on 4 December 1996) - Annex 1 - Recommendation on Performance Standards for Integrated Bridge Systems (IBS). LR Note: This Annex 1 is obsolete following the adoption of SN.1/Circ.288. - 5 Technical Requirements - 5.1 Sensors

5.1 Sensors

 In order to ensure an adequate system functionality the sensors employed should ensure communication compatibility in accordance with the relevant international marine interface standardfootnote; and provide information about their operational status and about the latency and validity of essential information.

Parent topic: 5 Technical Requirements
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.