6.7 Overboard discharge control management
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.108(49) - Revised Guidelines and Specifications for Oil Discharge Monitoring and Control Systems for Oil Tankers - (Adopted on 18 July 2003)Amended by Resolution MEPC.240(65) - Annex - Revised Guidelines and Specifications for Oil Discharge Monitoring and Control Systems for Oil Tankers - 6 Technical Specifications - 6.7 Overboard discharge control management

6.7 Overboard discharge control management

  6.7.1 The overboard discharge control should be able to stop the discharge of the effluent into the sea automatically by either closing all relevant overboard discharge valves or stopping all relevant pumps. The discharge control arrangement should be fail-safe so that all effluent discharge is stopped when the monitoring system is not in operation, at alarm conditions, or when the monitoring system fails to function.

Parent topic: 6 Technical Specifications
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.