Clasification Society Rulefinder 2020 - Version 9.33 - Fix
Statutory Documents - IMO Publications and Documents - Resolutions - Assembly - IMO Resolution A.658(16) – Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances – (Adopted on 19 October 1989) - Annex 1 - Recommendation on the Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances - 6 Immersion Suits

6 Immersion Suits

 Immersion suits should be fitted with patches of retro-reflective material with a total area of at least 400 cm2 distributed so as to be useful for search from air and surface craft from all directions.

 For an immersion suit that does not automatically turn the wearer face up, the back of the suit should be fitted with retro-reflective material with a total area of at least 100 cm2.

Parent topic: Annex 1 - Recommendation on the Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances
Copyright 2020 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.