Part 4 - Method for Determination of Oil Content
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.107(49) - Revised Guidelines and Specifications for Pollution Prevention Equipment for Machinery Space Bilges of Ships - (adopted on 18 July 2003) - Annex - Revised Guidelines and Specifications for Pollution Prevention Equipment for Machinery Space Bilges of Ships - Annex - Part 4 - Method for Determination of Oil Content

Part 4 - Method for Determination of Oil Content

Parent topic: Annex

Scope and application

 The International Standard ISO 9377-2:2000 “Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography” specifies a method for the sampling and subsequent determination of the hydrocarbon oil index in water using solvent extraction and gas chromatography. This method should be used for the determination of oil content requirements outlined in these Guidelines and Specification.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.