Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.214(63) – 2012 Guidelines on Survey and Certification of the Energy Efficiency Design Index (EEDI) – (Adopted on 2 March 2012)Amended by Resolution MEPC.234(65) - Annex – 2012 Guidelines on Survey and Certification of the Energy Efficiency Design Index (EEDI) - Appendix 3 – Electric Power Table Form for Energy Efficiency Design Index (EPT-EEI Form) and Statement of Validation
Appendix 3 – Electric Power Table Form for Energy Efficiency Design Index (EPT-EEI Form) and Statement of Validation
| Ship ID: | ||||
| IMO No.: ..................................................... | ||||
| Ship's Name: ..................................................... | ||||
| Shipyard: ..................................................... | ||||
| Hull No.: 5 Miles ..................................................... | ||||
| Applicant: | Validation Stage: | |||
| Name: ..................................................... |
|
Preliminary validation | ||
| Address:
..................................................... ..................................................... |
|
Final validation | ||
| Summary Results of EPT-EEDI | ||||
| Load Group |
Seagoing Condition EEDI Calculation Guidelines |
Intermittent Load (kW) | ||
| Continuous Load (kW) | Remarks | |||
| Ship Service and Engine-room Loads | ||||
| Accommodation and Cargo Loads | ||||
| Total installed load | ||||
| Diversity Factor | ||||
| Normal seagoing load | ||||
| Weighted average efficiency of generators | ||||
| PAE | ||||
| Supporting Documents | ||||
| Title | ID or Remarks | |||
| Validator details: | ||||
| Organization: ..................................................... | ||||
| Address:
..................................................... ..................................................... |
||||
| This is to certify that the above-mentioned electrical loads and supporting documents have been reviewed in accordance with EPT-EEDI Validation Guidelines and the review shows a reasonable confidence for use of the above PAE in EEDI calculations. | ||||
| The date of review: ..................................................... | Statement of validation No. ..................................................... | |||
| This statement is valid on condition that the electric power characteristics of the ship do not change. | ||||
| Signature of Validator | ||||
| Printed Name: | ||||
| Copyright 2026 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. |  |