Ship description
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.140(54) – Guidelines for Approval and Oversight of Prototype Ballast Water Treatment Technology Programmes (G10) – (Adopted on 24 March 2006) - Annex – Guidelines for Approval and Oversight of Prototype Ballast Water Treatment Technology Programmes (G10) - 3 Programme Application Requirements - Ship description

Ship description

  3.12 The Programme Application should include a full and complete description of the ship(s) in which the prototype ballast water treatment technology is to be installed. This description should include:

  • – ships' name;

  • – date of construction;

  • – flag;

  • – port of registry;

  • – gross tonnage;

  • – dead weight;

  • – IMO number;

  • – length (bp);

  • – beam;

  • – international call sign;

  • – deepest ballast drafts (normal and heavy weather);

  • – total ballast capacity of the ship in cubic metres and other units if applicable to the ship.

  3.13 The description should also include normal operational ballast flow rates and volumes, and, to the extent possible, typical voyage lengths and routes.

Parent topic: 3 Programme Application Requirements
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.