Part 10 - Test for Fire-Restricting Materials for High-Speed Craft
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - FTP Code - International Code for Application of Fire Test Procedures – Resolution MSC.61(67) - Annex - International Code for Application of Fire Test Procedures - Annex 1 - Fire Test Procedures - Part 10 - Test for Fire-Restricting Materials for High-Speed Craft

Part 10 - Test for Fire-Restricting Materials for High-Speed Craft

Parent topic: Annex 1 - Fire Test Procedures

1 Application

 Where materials used in high-speed craft are required to be fire-restricting, they shall comply with this part.

2 Fire test procedure

 Surface materials on bulkheads, wall and ceiling linings including their supporting structure, furniture, and other structural or interior components required to be fire-restricting materials shall be tested and evaluated in accordance with the fire test procedures specified in resolution MSC.40(64), as amended by resolution MSC.90(71).

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.