Statutory Documents - IMO Publications and Documents - Resolutions - Assembly - IMO Resolution A.1052(27) – Procedures for Port State Control, 2011 – (Adopted on 30 November 2011) - Annex – Procedures for Port State Control, 2011 - Appendix 6 – Guidelines for More Detailed Inspections of Ship Structural and Equipment Requirements - 11 Equipment in excess of convention or flag State requirements
11 Equipment in excess of convention or flag State requirements
Equipment on board which is expected to be relied on in situations affecting safety or pollution prevention must be in operating condition. If such equipment is inoperative and is in excess of the equipment required by an appropriate convention and/or the flag State, it should be repaired, removed or, if removal is not practicable, clearly marked as inoperative and secured.
| Copyright 2020 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. |  |