3.6 Ventilation
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Assembly - IMO Resolution A.798(19) – Guidelines for the Selection, Application and Maintenance of Corrosion Prevention Systems of Dedicated Seawater Ballast Tanks – (Adopted on 23 November 1995) - Annex - Guidelines for the Selection, Application and Maintenance of Corrosion Prevention Systems of Dedicated Seawater Ballast Tanks - 3 Coating - 3.6 Ventilation

3.6 Ventilation

  3.6.1 Adequate ventilation is necessary for the proper curing of coating. Ventilation should be maintained throughout the application process and for a period after application is completed, as recommended by the coating manufacturer.

Parent topic: 3 Coating
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.