3.5 Method of analysis
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1319 – Recommendation for the Evaluation of Fire Performance and Approval of Large Fire Doors – (11 June 2009) - Annex – Recommendation for the Evaluation of Fire Performance and Approval of Large Fire Doors - 3 Doors larger than those in section 1 above, but not exceeding 50% in surface area - 3.5 Method of analysis

3.5 Method of analysis

 The comparison of the fire resistance of doors having larger geometry should be considered in two steps:

  • .1 evaluation of the heat transmission through the specimen thickness and of the temperature on the unexposed specimen surface; and

  • .2 evaluation of the strength characteristics and of the displacements of the structural members of the specimen.

Parent topic: 3 Doors larger than those in section 1 above, but not exceeding 50% in surface area
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.