Circular
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Tonnage Measurement - TM.5/Circular.6 – Unified Interpretations Relating to the International Convention on Tonnage Measurement of Ships, 1969 - Circular

Circular

  1 The Maritime Safety Committee, at its sixty-third session (16 to 25 May 1994), agreed to a consolidated set of interpretations of the provisions of the International Convention on Tonnage Measurement of Ships, 1969 (TM.5/Circ.5).

  2 The Maritime Safety Committee, at its ninety-third session (14 to 23 May 2014), having considered a proposal by the Sub-Committee on Ship Design and Construction, at its first session, approved the Unified interpretations relating to the International Convention on Tonnage Measurement of Ships, 1969 (the 1969 Tonnage Convention), as set out in the annex.

  3 Member Governments are invited to use these Unified interpretations when applying the provisions of the 1969 Tonnage Convention.

  4 This circular supersedes circular TM.5/Circ.5.


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.