17.2 Proof of compliance
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - HSC Code - International Code of Safety for High Speed Craft, 1994 – Resolution MSC.36(63) - Annex - International Code of Safety for High Speed Craft, 1994 - Chapter 17 - Handling, Controllability and Performance - 17.2 Proof of compliance

17.2 Proof of compliance

 The information on controllability and manoeuvrability which should be contained in the operating manual should include the characteristics under 17.5, and the list of parameters of the worst intended conditions affecting the controllability and manoeuvrability according to 17.6 and the performance data verified in accordance with annex 8.

Parent topic: Chapter 17 - Handling, Controllability and Performance
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.