3 Test Conditions
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Maritime Safety Committee - Resolution MSC.41(64) - Interim Standard for Measuring Smoke and Toxic Products for Combustion - (adopted on 5 December 1994) - Annex - Interim Standard for Measuring Smoke and Toxic Products of Combustion - 3 Test Conditions

3 Test Conditions

 Irradiance to the specimen during the test should be kept constant. Three specimens should be tested under each of the following conditions:

  • .1 irradiance of 25kW/m2 in the presence of pilot flame;

  • .2 irradiance of 25kW/m2 in the absence of pilot flame; and

  • .3 irradiance of 50kW/m2 in the absence of pilot flame.

Parent topic: Annex - Interim Standard for Measuring Smoke and Toxic Products of Combustion
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.