Clasification Society Rulefinder 2016 - Version 9.25
Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.197(62) – 2011 Guidelines for the Development of the Inventory of Hazardous Materials – (Adopted on 15 July 2011) - Annex – 2011 Guidelines for the Development of the Inventory of Hazardous Materials - Appendix 3 – Example of the Development Process for Part I of the Inventory for New Ships - 2 Development flow for Part I of the Inventory

2 Development flow for Part I of the Inventory

 Part I of the Inventory should be developed using the following 3 steps. However, the order of these steps is flexible and can be changed depending on the schedule of shipbuilding:

  • .1 collection of Hazardous Materials information;

  • .2 utilization of Hazardous Materials information; and

  • .3 preparation of the Inventory (by filling out standard format).

Parent topic: Appendix 3 – Example of the Development Process for Part I of the Inventory for New Ships
Copyright 2016 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.