Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.197(62) – 2011 Guidelines for the Development of the Inventory of Hazardous Materials – (Adopted on 15 July 2011) - Annex – 2011 Guidelines for the Development of the Inventory of Hazardous Materials - 4 Requirements for development of the Inventory - 4.7 Description of approximate quantity of Hazardous Materials
4.7 Description of approximate quantity of Hazardous Materials
In order to identify the approximate quantity of Hazardous Materials, the standard unit used for the of Hazardous Materials should be kg, unless other units (e.g., m3 for materials of liquid or gases, m2 for materials used in floors or walls) are considered more appropriate. An approximate quantity should be rounded up to at least two significant figures.
| Copyright 2016 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. |  |