20 Surface of Working Decks
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - SCV Code - Code of Safety for Small Commercial Vessels Operating in the Caribbean - Chapter II - Construction - Part D - Working Decks - 20 Surface of Working Decks

20 Surface of Working Decks

  20.1 The surface of a working deck shall be non-slip. Acceptable surfaces are: chequered plate; unpainted wood; a non-skid pattern moulded into fibre reinforced plastic (FRP); non-slip deck paint; or an efficient non-slip covering.

  20.2 A hatch cover fitted on a working deck shall have a non-slip finish.

  20.3 In an inflatable boat or rigid inflatable boat the upper surface of the inflated buoyancy tube shall be provided with a non-slip finish.

Parent topic: Part D - Working Decks
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.