Annex – Unified Interpretation of the 1969 TM Convention
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1546 – Unified Interpretation of the 1969 TM Convention – (6 June 2016) - Annex – Unified Interpretation of the 1969 TM Convention

Annex – Unified Interpretation of the 1969 TM Convention

 Regulation 2(4) – Enclosed spaces

Regulation 6(2) – Calculation of volumes

Heat exchangers (coolers) fitted in hull recesses or outside of the hull should be treated as machinery under interpretation R.2(4)-9 set out in the annex to the Unified interpretations relating to the International Convention on Tonnage Measurement of Ships, 1969 (TM.5/Circ.6) and not as appendages.

Parent topic: MSC.1/Circular.1546 – Unified Interpretation of the 1969 TM Convention – (6 June 2016)
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.