Calculation of outflow in case of side damage as per 5.2 of the IMO Guidelines
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Marine Environment Protection Committee - MEPC/Circular.365 – Interpretation of Requirements for Application of Hydrostatic Balance Loading in Cargo Tanks (Resolution MEPC.64(36)) – (Adopted 26 July 1999) - Annex - IACS Unified Interpretation MPC 7 - Hydrostatic Balance Loading - Calculation of outflow in case of side damage as per 5.2 of the IMO Guidelines

Calculation of outflow in case of side damage as per 5.2 of the IMO Guidelines

  .10 Distance from the hull boundary to the tank plating, si:

si is the minimum distance from the hull plating to the tank boundary measured at right angle to the centreline and at the level corresponding to the maximum assigned summer load line.

  .11 Cargo volume in tank number i, Vi:

The maximum volume of Vi is 98% of the volume of the tank.

Parent topic: Annex - IACS Unified Interpretation MPC 7 - Hydrostatic Balance Loading
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.