11.5 Composite section
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - Grain Code - International Code for the Safe Carriage of Grain in Bulk – Resolution MSC.23(59) - Part A - Specific requirements - 11 Strength of grain fittings - 11.5 Composite section

11.5 Composite section

 Where uprights, binders or any other strength members are formed by two separate sections, one fitted on each side of a division and interconnected by through bolts at adequate spacing, the effective section modulus shall be taken as the sum of the two moduli of the separate sections.

Parent topic: 11 Strength of grain fittings
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.