6.2.2.1 An engine parameter check method shall
be carried out using the two procedures as follows:
-
.1 a documentation inspection of engine parameter(s)
shall be carried out in addition to other inspections and include
inspection of record books covering engine parameters and verification
that engine parameters are within the allowable range specified in
an engine's technical file; and
-
.2 an actual inspection of engine components and
adjustable features shall be carried out in addition to the documentation
inspection as necessary. It shall then be verified, referring to the
results of the documentation inspection, that the engine adjustable
features are within the allowable range specified in an engine's technical
file.
6.2.2.2 The surveyor shall have the option of
checking one or all of the identified components, settings or operating
values to ensure that the engine with no, or minor, adjustments or
modifications complies with the applicable emission limits and that
only components of the current specification are being used. Where
adjustments and/or modifications in a specification are referenced
in the technical file, they must fall within the range recommended
by the manufacturer and approved by the Administration.