Appendix 3 - Electric Power Table Form for Energy Efficiency Design Index (EPT-EEDI Form) and Statement of Validation
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Marine Environment Protection Committee - MEPC.1/Circular.855/Rev.2 - 2014 Guidelines on Survey and Certification of the Energy Efficiency Design Index (EEDI), as amended (Resolution MEPC.254(67), as amended by Resolution MEPC.261(68) and Resolution MEPC.309(73)) – (14 January 2019) - Appendix 3 - Electric Power Table Form for Energy Efficiency Design Index (EPT-EEDI Form) and Statement of Validation

Appendix 3 - Electric Power Table Form for Energy Efficiency Design Index (EPT-EEDI Form) and Statement of Validation

Ship ID:

IMO no.: _____________________

Ship's name: ___________________

Shipyard: _____________________

Hull no.:______________________

Applicant:   Validation stage:
Name: ____________________________ ☐ Preliminary validation

☐ Final validation

Address: ____________________________
  ____________________________

Summary results of EPT-EEDI

Load group Seagoing condition
EEDI Calculation guidelines 		Remarks
Continuous
load (kW) 		Intermittent
load (kW)
Ship service and engine-room loads
Accommodation and cargo loads
Total installed load
Diversity factor
Normal seagoing load
Weighted average efficiency of generators
PAE
Supporting documents
Title ID or remarks
Validator details:  
Organization: ____________________________________________________________________
Address: ____________________________________________________________________
  ____________________________________________________________________

This is to certify that the above-mentioned electrical loads and supporting documents have been reviewed in accordance with EPT-EEDI Validation Guidelines and the review shows a reasonable confidence for use of the above PAE in EEDI calculations.

Date of review:_______________________ Statement of validation no._________

This statement is valid on condition that the electric power characteristics of the ship do not change.

  Signature of Validator
  _____________________________________________________
  Printed name:
  ___________
Parent topic: MEPC.1/Circular.855/Rev.2 - 2014 Guidelines on Survey and Certification of the Energy Efficiency Design Index (EEDI), as amended (Resolution MEPC.254(67), as amended by Resolution MEPC.261(68) and Resolution MEPC.309(73)) – (14 January 2019)
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.