8.1 Input Data
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Maritime Safety Committee - Resolution MSC.192(79) - Adoption of the Revised Performance Standards for Radar Equipment - (Adopted on 6 December 2004) - Annex - Revised Recommendation on Performance Standards for Radar Equipment - 8 Interfacing - 8.1 Input Data

8.1 Input Data

 The radar system should be capable of receiving the required input information from:

  • a gyro-compass or transmitting heading device (THD);
  • a speed and distance measuring equipment (SDME);
  • an electronic position fixing system (EPFS);
  • an Automatic Identification System (AIS); or
  • other sensors or networks providing equivalent information acceptable to the Organization.

The radar should be interfaced to relevant sensors required by these performance standards in accordance with recognized international standards.footnote

Parent topic: 8 Interfacing
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.